DTA
THOR Racing are able to source any DTA-fast Engine Management system.
We are also able to install and tune the DTA "P8Pro" and "E48 EXP" systems.
Please see the services section for more details.
P8PRO
The P8PRO has been developed from the outset as a fully capable engine and vehicle management system for engines up to 12 cylinders of almost any configuration.
P8PRO packs a host of advanced features required by modern multi-cylinder applications.
P8PRO Features
- Eight individually controllable coil drivers for unequal firing or different cylinder advance.
- Eight injector drivers, with individual adjustments, for sequential injection up to eight cylinders or control of up to 16 staged twin injectors.
- Amplified Coils Support NEW
- Full 3 or 4 wheel traction control with switchable, on dash, on/off and wet/dry settings.
- Launch control with numerous options.
- Turn off closed loop above TPS & RPM NEW
- Full turbo anti lag facilities, switchable on dash.
- Logging switch able on dash NEW
- Voltage in warning limits during Mapping NEW
- Manifold Pressure as main load NEW
- Improved idle speed control NEW
- Nine auxiliary outputs for various functions.
- Improved, more flexible data logging capabilities NEW
- Compensation for air temp / water temp / MAP or barometric pressure on fuel and ignition.
- Closed loop Lambda control.
- Full turbo pressure control variable by RPM with overboost protection.
- Steering wheel button controlled start line RPM limit.
- Full power shift cut.
- Temperature dependant idle speed control via PWM valve.
- Dedicated shift light output.
- Serial output of data for dashboard NEW
- Dedicated Tacho output.
- Two stage main RPM limiter.
- Dedicated fuel pump control.
- Full start-up fuelling map.
- Throttle transient enrichment map.
- Self test facilities for ignition and injection.
- Diagnostics and peak recording.
- Real time mapping, no EPROM's required.
- Selectable 20 X 14 lambda target map
- In-vehicle fuel map building
- Can use 5 volt linear lambda sensor with external electronics
- Software programmable for most crank wheels, (Honda Blackbird, Rover, 36 - 1, 60-2 etc).
- All main 3D maps (20 x 14) have user programmable break points.
- Max. RPM 16,000.
-
Flexible PWM outputs linked to any input useable for any of the following;
- Water injection (multistage)
- Speed related power reduction (Drag bikes)
- NOS control with fuel enrichment and ignition retard (multistage)
- Fuel Mixture control for endurance racing
- Twin Fuel pump control
- Anything else requiring mixture and ignition control
- linked to an input and an output.
