£180.00+VAT

£211.50 incl

The APEXi RSM is a complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. You can enhance it's functionality by use of the optional G-Sensor which will allow the calculation of power and torque based on vehicle weight and rate of acceleration as well and pitch and roll G. more

£50.00+VAT

£58.75 incl

Optional G-Sensor for Apexi Rev Speed Meter more

£149.00+VAT

£175.08 incl

The Power Meter i-D measures and displays on the in built LCD screen the vehicles power and speed. The Power Meter i-D also has a Chassis Dyno Function , 0-1/4 mile times and other time and speed targets. more

£250.00+VAT

£293.75 incl

The R-VIT is an ultra modern tool that can display much needed information about the vehicles vital running data in real time. Warning limits can be set that flash when you have exceeded a pre-set limit, thus reducing the chances of expensive engine damage. more

£350.00+VAT

£411.25 incl

DisplayLink - Graphical User Interface
DisplayLink, the new graphical display from Link ElectroSystems Ltd. Designed to work with both Wire-In and Plug-In Link Engine Management Systems, as well as the new G3 platform, the DisplayLink adds many capabilities to your engine mangement system.
more

£160.00+VAT

£188.00 incl

The TurboXS DTEC is a revolutionary new product that turns your Nintendo® Gameboy Advance into a programmable, upgradeable, automotive performance tool for tuning, data logging, and diagnostics. more

£109.00+VAT

£128.08 incl

The Knock Block has an ear phone socket, linear output voltage for data loggers and the ability to drive two Bosch wide band knock sensors. Adjustable frequency switch, 7.5khz -> 9khz.
more

£200.00+VAT

£235.00 incl

The knock block is available as a kit with 2 knock sensors and sprung connector plugs. more

£69.00+VAT

£81.08 incl

For cars which already have a Bosch Knock sensor the Knock Link is available on it's own. NOTE: Bosch knock sensors and plug fittings are also avalible seperatley on request. more

£124.00+VAT

£145.70 incl

The Knock Link is about the best value for money and easiest (with only 4 wires to connect) Detonation monitors money can buy. Comes complete with wiring loom, Bosch knock sensor and sensor plug fitting. more

£90.00+VAT

£105.75 incl

Knock Detector and Combined Shift Light.

This unit will detect engine knock / detonation and flash the multicolored LED to alert you. more

£140.00+VAT

£164.50 incl

Knock Detector and combined shift light.

Kit includes BOSCH Knock Sensor and connector plug. more

£69.00+VAT

£81.08 incl

Oxygen sensors (Lambda Probes) are self generating sensors that produce a small output voltage according to the oxygen content of the exhaust gas.

Higher amounts of exhaust oxygen indicate a lean mixture, and produce a small output voltage. Rich mixtures produce very little oxygen and the output voltage is higher. This voltage range is amplified and scaled by the display unit to drive an LED bar-graph calibrated to both air/fuel ratio and carbon monoxide (CO).
more

£335.00+VAT

£393.63 incl

This low cost, high performance air fuel ratio data logging unit is most efficiently used in conjunction with a UTEC or Dtec, but can be used as a standalone device. more

£490.00+VAT

£575.75 incl

This powerful air fuel ratio data logging suite is tailored to the professional user, but gives any user the information required to properly tune their vehicle. more